XSG I8190XXAMG4 20130917112236 Zip
Click Here >>> https://tlniurl.com/2tvRz3
How to Download and Install Samsung Galaxy S3 Mini Firmware I8190XXAMG4
If you own a Samsung Galaxy S3 Mini smartphone and want to update its software, you can download the latest firmware version I8190XXAMG4 from Samfrew.com. This firmware is for the United Arab Emirates region and has the product code XSG. It was released on September 17, 2013 and has the Android version 4.1.2.
Before you proceed with the download and installation, make sure you have backed up your data and have enough battery charge. You also need to have a compatible USB cable and a Windows PC with Samsung USB drivers installed. You can use Samsung Kies or Odin software to flash the firmware on your device.
To download the firmware, go to this link and click on the \"Download\" button. The file size is about 700 MB and it will be saved as a zip file on your computer. You need to extract the zip file to get the firmware files.
To install the firmware, follow these steps:
Turn off your device and boot it into download mode by pressing and holding Volume Down, Home and Power buttons together.
Connect your device to your PC using the USB cable.
Launch Odin software on your PC and make sure it recognizes your device. You should see a blue or green box in the ID:COM section.
Click on the \"PDA\" or \"AP\" button and browse to the folder where you extracted the firmware files. Select the file that has a .tar.md5 extension.
Make sure that only \"Auto Reboot\" and \"F. Reset Time\" options are checked in Odin. Do not check any other options or change any settings.
Click on the \"Start\" button and wait for the flashing process to complete. It may take several minutes.
Once the flashing is done, your device will reboot automatically. You should see a \"PASS\" message in Odin.
Disconnect your device from your PC and enjoy the new firmware.
Congratulations! You have successfully downloaded and installed Samsung Galaxy S3 Mini firmware I8190XXAMG4 on your device.
If you encounter any problems or errors while flashing the firmware, you can try the following solutions:
Make sure you have downloaded the correct firmware for your device model and region. You can check your device model number and product code by dialing *#1234# on your phone.
Make sure you have installed the latest Samsung USB drivers on your PC. You can download them from here.
Make sure you have disabled any antivirus or firewall software on your PC that may interfere with Odin.
Make sure you have enough battery charge on your device before flashing. It is recommended to have at least 50% charge.
Try using a different USB port or cable if Odin does not recognize your device.
Try using a different version of Odin if the flashing fails or gets stuck. You can download different versions of Odin from here.
If none of these solutions work, you can contact Samsung customer support or visit a nearby service center for further assistance.
Flashing a new firmware on your device can bring many benefits, such as improved performance, stability, security and features. However, it also involves some risks, such as voiding your warranty, losing your data or bricking your device. Therefore, you should always flash firmware at your own risk and responsibility.
We hope this article has helped you to download and install Samsung Galaxy S3 Mini firmware I8190XXAMG4 on your device. If you have any questions or feedback, feel free to leave a comment below. aa16f39245